User Contributed Diagnostic Tools Division ============================================================================= INSTRUMENT: Fluke PM 2327 (Performance) Ver 1.0 DATE: 16-Sep-93 AUTHOR: User Contributed REVISION: 1.0 ADJUSTMENT THRESHOLD: 70% NUMBER OF TESTS: 73 NUMBER OF LINES: 213 CONFIGURATION: Fluke 8842A CONFIGURATION: Fluke 6060B CONFIGURATION: HP 436A ============================================================================= #Proc called by this program - SUB PM 2327 (Power Measurements) STEP FSC RANGE NOMINAL TOLERANCE MOD1 MOD2 3 4 CON 1.001 ASK- R N P F W 1.002 HEAD INTRODUCTION 1.003 DISP This procedure is intended to: 1.003 DISP - Check the instrument's specification. 1.003 DISP 1.003 DISP Connect the 8840 input to the UUT - COM BNC. 1.003 DISP Connect SHORTS to the UUT - 0,1,2,3,4,5,6,7 Inputs. 1.003 DISP 1.003 DISP Connect the UUT to the IEEE bus. Use a 2300 Base unit 1.003 DISP with the adress set to 30. 1.004 IEEE *IDN?[I$] 1.005 DISP Verify Software version against master list. 1.005 DISP 1.005 DISP UUT response as - [MEM2] 1.006 IEEE *RST;:ARM:COUN 6;:TRIG:SOUR BUS;:SCAN (@0:7) 1.006 IEEE :INIT;:TRIG 1.007 8842 0.000Z 1U 2W 2.001 IEEE :TRIG 2.002 8842 0.000Z 1U 2W 3.001 IEEE :TRIG 3.002 8842 0.000Z 1U 2W 4.001 IEEE :TRIG 4.002 8842 0.000Z 1U 2W 5.001 IEEE :TRIG 5.002 8842 0.000Z 1U 2W 6.001 IEEE :TRIG 6.002 8842 0.000Z 1U 2W 7.001 IEEE :TRIG 7.002 8842 0.000Z 1U 2W 8.001 IEEE :TRIG 8.002 8842 0.000Z 1U 2W 9.001 HEAD {Insertion Loss and isolation - Channel 0} 9.002 6060 500MH 13D -D S 9.003 IEEE [@436][TERM LF]9D-V[I$] 9.004 DISP Connect Power meter to the 6062a output. 9.004 DISP 9.004 DISP This measurement will set the referance for the 9.004 DISP insertion loss measurements. It is important that 9.004 DISP the measurement is made at the end of the cable that 9.004 DISP is used for the test. 9.005 IEEE [@436][TERM LF]CT[I$]T[I$]T[I$] 9.006 DISP Disconnect SHORTS from the UUT - 0,1,2,3,4,5,6,7 Inputs. 9.006 DISP 9.006 DISP Connect the cable used in the referance measurement 9.006 DISP from the 6060 output to the UUT - COM input. 9.006 DISP 9.006 DISP Connect the 436 Power Sensor to the UUT - 0 output. 9.007 CALL SUB PM 2327 (Power Measurements) 9.008 MEME <1 9.009 MEMC -1.80dBc -1.8U @Ch0 10.001 MEME <2 10.002 MEMC -25.0dBc +10U @Ch1 11.001 MEME <3 11.002 MEMC -25.0dBc +10U @Ch2 12.001 MEME <4 12.002 MEMC -25.0dBc +10U @Ch3 13.001 MEME <5 13.002 MEMC -25.0dBc +10U @Ch4 14.001 MEME <6 14.002 MEMC -25.0dBc +10U @Ch5 15.001 MEME <7 15.002 MEMC -25.0dBc +10U @Ch6 16.001 MEME <8 16.002 MEMC -25.0dBc +10U @Ch7 17.001 HEAD {Insertion Loss and isolation - Channel 1} 17.002 DISP Connect the 436 Power Sensor to the UUT - 1 output. 17.003 CALL SUB PM 2327 (Power Measurements) 17.004 MEME <1 17.005 MEMC -25.0dBc +10U @Ch0 18.001 MEME <2 18.002 MEMC -1.80dBc -1.8U @Ch1 19.001 MEME <3 19.002 MEMC -25.0dBc +10U @Ch2 20.001 MEME <4 20.002 MEMC -25.0dBc +10U @Ch3 21.001 MEME <5 21.002 MEMC -25.0dBc +10U @Ch4 22.001 MEME <6 22.002 MEMC -25.0dBc +10U @Ch5 23.001 MEME <7 23.002 MEMC -25.0dBc +10U @Ch6 24.001 MEME <8 24.002 MEMC -25.0dBc +10U @Ch7 25.001 HEAD {Insertion Loss and isolation - Channel 2} 25.002 DISP Connect the 436 Power Sensor to the UUT - 2 output. 25.003 CALL SUB PM 2327 (Power Measurements) 25.004 MEME <1 25.005 MEMC -25.0dBc +10U @Ch0 26.001 MEME <2 26.002 MEMC -25.0dBc +10U @Ch1 27.001 MEME <3 27.002 MEMC -1.80dBc -1.8U @Ch2 28.001 MEME <4 28.002 MEMC -25.0dBc +10U @Ch3 29.001 MEME <5 29.002 MEMC -25.0dBc +10U @Ch4 30.001 MEME <6 30.002 MEMC -25.0dBc +10U @Ch5 31.001 MEME <7 31.002 MEMC -25.0dBc +10U @Ch6 32.001 MEME <8 32.002 MEMC -25.0dBc +10U @Ch7 33.001 HEAD {Insertion Loss and isolation - Channel 3} 33.002 DISP Connect the 436 Power Sensor to the UUT - 3 output. 33.003 CALL SUB PM 2327 (Power Measurements) 33.004 MEME <1 33.005 MEMC -25.0dBc +10U @Ch0 34.001 MEME <2 34.002 MEMC -25.0dBc +10U @Ch1 35.001 MEME <3 35.002 MEMC -25.0dBc +10U @Ch2 36.001 MEME <4 36.002 MEMC -1.80dBc -1.8U @Ch3 37.001 MEME <5 37.002 MEMC -25.0dBc +10U @Ch4 38.001 MEME <6 38.002 MEMC -25.0dBc +10U @Ch5 39.001 MEME <7 39.002 MEMC -25.0dBc +10U @Ch6 40.001 MEME <8 40.002 MEMC -25.0dBc +10U @Ch7 41.001 HEAD {Insertion Loss and isolation - Channel 4} 41.002 DISP Connect the 436 Power Sensor to the UUT - 4 output. 41.003 CALL SUB PM 2327 (Power Measurements) 41.004 MEME <1 41.005 MEMC -25.0dBc +10U @Ch0 42.001 MEME <2 42.002 MEMC -25.0dBc +10U @Ch1 43.001 MEME <3 43.002 MEMC -25.0dBc +10U @Ch2 44.001 MEME <4 44.002 MEMC -25.0dBc +10U @Ch3 45.001 MEME <5 45.002 MEMC -1.80dBc -1.8U @Ch4 46.001 MEME <6 46.002 MEMC -25.0dBc +10U @Ch5 47.001 MEME <7 47.002 MEMC -25.0dBc +10U @Ch6 48.001 MEME <8 48.002 MEMC -25.0dBc +10U @Ch7 49.001 HEAD {Insertion Loss and isolation - Channel 5} 49.002 DISP Connect the 436 Power Sensor to the UUT - 5 output. 49.003 CALL SUB PM 2327 (Power Measurements) 49.004 MEME <1 49.005 MEMC -25.0dBc +10U @Ch0 50.001 MEME <2 50.002 MEMC -25.0dBc +10U @Ch1 51.001 MEME <3 51.002 MEMC -25.0dBc +10U @Ch2 52.001 MEME <4 52.002 MEMC -25.0dBc +10U @Ch3 53.001 MEME <5 53.002 MEMC -25.0dBc +10U @Ch4 54.001 MEME <6 54.002 MEMC -1.80dBc -1.8U @Ch5 55.001 MEME <7 55.002 MEMC -25.0dBc +10U @Ch6 56.001 MEME <8 56.002 MEMC -25.0dBc +10U @Ch7 57.001 HEAD {Insertion Loss and isolation - Channel 6} 57.002 DISP Connect the 436 Power Sensor to the UUT - 6 output. 57.003 CALL SUB PM 2327 (Power Measurements) 57.004 MEME <1 57.005 MEMC -25.0dBc +10U @Ch0 58.001 MEME <2 58.002 MEMC -25.0dBc +10U @Ch1 59.001 MEME <3 59.002 MEMC -25.0dBc +10U @Ch2 60.001 MEME <4 60.002 MEMC -25.0dBc +10U @Ch3 61.001 MEME <5 61.002 MEMC -25.0dBc +10U @Ch4 62.001 MEME <6 62.002 MEMC -25.0dBc +10U @Ch5 63.001 MEME <7 63.002 MEMC -1.80dBc -1.8U @Ch6 64.001 MEME <8 64.002 MEMC -25.0dBc +10U @Ch7 65.001 HEAD {Insertion Loss and isolation - Channel 7} 65.002 DISP Connect the 436 Power Sensor to the UUT - 7 output. 65.003 CALL SUB PM 2327 (Power Measurements) 65.004 MEME <1 65.005 MEMC -25.0dBc +10U @Ch0 66.001 MEME <2 66.002 MEMC -25.0dBc +10U @Ch1 67.001 MEME <3 67.002 MEMC -25.0dBc +10U @Ch2 68.001 MEME <4 68.002 MEMC -25.0dBc +10U @Ch3 69.001 MEME <5 69.002 MEMC -25.0dBc +10U @Ch4 70.001 MEME <6 70.002 MEMC -25.0dBc +10U @Ch5 71.001 MEME <7 71.002 MEMC -25.0dBc +10U @Ch6 72.001 MEME <8 72.002 MEMC -1.80dBc -1.8U @Ch7 73.001 END